Woodward easYgen-2000 Series User Manual page 394

Application
Special Applications > Connecting A Landline Modem
Connection
394
The dispatch of an alarm message is performed by the
modem after energizing a discrete input.
If a different modem is used, this has to accept
incoming calls automatically and establish a connec‐
tion between calling PC and easYgen.
It is possible to issue an active call in case of a malfunction using a
relay of the relay manager.
1. Connect the easYgen and the modem with the power supply
as directed.
Fig. 179: Landline modem wiring
2. Use a straight RS-232 cable (not delivered with the modem)
for connecting the DPC with the modem.
When commissioning the system, use a null modem cable
(delivered with DPC) to configure the easYgen via a PC with
ToolKit.
easYgen-2200/2500 | Genset Control 37535B