Woodward easYgen-2000 Series User Manual page 585

Simple (function)
[00.43] Relay 3 [R03] - Starter / freely configurable
Relay energizes if the internal condition "Starter"
is TRUE
[00.44] Relay 4 [R04] - Start/Gas / freely configurable
Relay energizes if the internal condition "Start/
Gas" is TRUE to energize the start (Diesel) or
gas (Gas) solenoid
[00.45] Relay 5 [R05] - Command: open MCB / freely configurable
In application mode ,
configurable relay (unassigned)
In application mode "Command: close
MCB"
[00.46] Relay 6 [R06] - Free / Command: close GCB
In application mode and
urable relay (unassigned)
In application mode and
close GCB"
Deactivated by default
[00.47] Relay 7 [R07] - Mains decoupling / freely configurable / Command: open GCB
In application mode pre-configured to mains
decoupling. Relay energizes if the internal condi‐
tion "Mains decoupling" is TRUE to decouple the
genset from the mains.
In application mode ,
mand: open GCB"
Deactivated by default
[00.48] Relay 8 [R08] - Free / Command: close MCB
37535B
Extended (configuration)
and = freely
= freely config‐
"Command:
and "Com‐
easYgen-2200/2500 | Genset Control
LogicsManager Reference > Factory Settings
Appendix
Result
dependent on
Logics Com‐
mand Variable
[03.02]
dependent on
Logics Com‐
mand Variable
[03.28]
dependent on
Logics Com‐
mand Variable
[01.08]
FALSE
dependent on
application
mode and
Logics Com‐
mand Variable
[07.25]
585