Woodward easYgen-2000 Series User Manual page 480

Technical Specifications
Accuracy
Measuring value Display
Phase angle -180 to 180°
Analog inputs
0 to 180 Ohms Freely scaleable
0 to 360 Ohms Freely scaleable
0 to 500 Ohms Freely scaleable
0 to 20 mA Freely scaleable
Reference conditions
480
Accuracy
1 % / 2.5 % 4 (of
500 Ohms)
1 % / 2.5 % 4 (of 20 mA)
1 Setting of the parameter for the PT secondary rated
voltage
2 Depending on the used measuring inputs
(120/480 V)
3 Depending on the CT input hardware (1/5 A) of the
respective unit
For two-pole senders only / for single-pole senders
4
and a combination of single- and two-pole sensors
The reference conditions for measuring the accuracy
are listed below.
Input voltage
Input current
Frequency
Power supply
Power factor (cos φ)
Ambient temperature
Warm-up period
easYgen-2200/2500 | Genset Control
Measuring start Notes
1.25 % (of PT secondary 180° is displayed for
volt. setting) measuring values below
measuring start
For VDO sensors
For VDO sensors
For resistive sensors
Sinusoidal rated voltage
Sinusoidal rated current
Rated frequency +/- 2 %
Rated voltage +/- 2 %
1.00
23 °C +/- 2 K
20 minutes
37535B