Application Modes Overview - Woodward easYgen-2000 Series User Manual

System Overview

Application Modes Overview

Fig. 5: easYgen-2000 Series (housing variants)
A easYgen-2200 (plastic housing with display)
B easYgen-2500 (plastic housing with display)
1 Analog output and generator CT terminal
2 Mains/generator/busbar PT terminal
3
Service port connector (USB/RS-232)
4 Relay outputs terminal
5 Discrete inputs terminal
2.3

Application Modes Overview

28
6
7
8
1
9
10
11
1 Optional configuration cable for ToolKit configuration
software required:
USB connector: DPC-USB direct configuration
–
cable – P/N 5417-1251
RS-232 connector: DPC-RS-232 direct configura‐
–
tion cable – P/N 5417-557
For information on how to setup connections refer to
Ä Chapter 3.2 "Setup Connections" on page 36.
For information on the interfaces and protocols refer to
Ä Chapter 7 "Interfaces And Protocols" on page 451.
The genset control provides the following basic functions via the
application modes listed below.
easYgen-2200/2500 | Genset Control
CAN bus interface terminal #1
CAN bus interface terminal #2 (easYgen-2200
Package P2 only)
Analog input/outputs terminal and discrete
inputs terminal
Relay outputs terminal
CAN bus interface terminal #2
RS-485 interface terminal
37535B