Logical Outputs - Woodward easYgen-2000 Series User Manual

9.4.3

Logical Outputs

Internal flags
Name
Flag 1
Flag 2
Flag 3
Flag 4
Flag 5
Flag 6
Flag 7
Flag 8
Flag 9
Flag 10
Flag 11
Flag 12
Flag 13
Flag 14
Flag 15
Flag 16
Internal functions
Name
Start request in AUTO
Stop request in AUTO
37535B
The logical outputs or combinations may be grouped into three cat‐
egories:
Internal logical flags
n
Internal functions
n
Relay outputs
n
16 internal logical flags may be programmed to activate/deactivate
functions. This permits more than 3 commands to be included in a
logical function. They may be used like "auxiliary flags".
Function
Internal flag 1
Internal flag 2
Internal flag 3
Internal flag 4
Internal flag 5
Internal flag 6
Internal flag 7
Internal flag 8
Internal flag 9
Internal flag 10
Internal flag 11
Internal flag 12
Internal flag 13
Internal flag 14
Internal flag 15
Internal flag 16
The following logical functions may be used to activate/deactivate
functions.
Function
Start in AUTOMATIC operating mode (parameter
Stop in AUTOMATIC operating mode (parameter
easYgen-2200/2500 | Genset Control
LogicsManager Reference > Logical Outputs
The numbers of the logical outputs in the third column
may again be used as input variable for other outputs
in the LogicsManager.
Number
00.01
00.02
00.03
00.04
00.05
00.06
00.07
00.08
00.30
00.31
00.32
00.33
00.34
00.35
00.36
00.37
12120 Ä p. 246)
12190 Ä p. 247)
Appendix
Number
00.09
00.10
553