Rs-485 Interface; Canopen Protocol - Woodward easYgen-2000 Series User Manual

Genset control

Hide thumbs Also See for easYgen-2000 Series:

Table of Contents

Interfaces And Protocols

RS-485 Interface

CANopen Protocol

Fig. 246: Service Port

The service port can be only used in combination

with an optional Woodward direct configuration cable

(DPC), which inclucdes a converter box to provide

either an USB or a RS-232 interface.

For additional information refer to

Ä Chapter 3.2.15 "Service Port" on page 79.

A freely configurable RS-485 Modbus RTU Slave interface is pro‐

vided to add PLC connectivity. It is also possible to configure the

unit, visualize measured data and alarm messages, and control the

unit remotely.

Fig. 247: RS-485 interface

CANopen is a communication protocol and device profile specifica‐

tion for embedded systems used in automation. The CANopen

standard consists of an addressing scheme, several small commu‐

nication protocols and an application layer defined by a device pro‐

file. The communication protocols have support for network man‐

agement, device monitoring and communication between nodes,

including a simple transport layer for message segmentation/

desegmentation.

easYgen-2200/2500 | Genset Control