Woodward easYgen-2000 Series User Manual page 391

ToolKit settings
Fig. 174: Connect modem
GSM modem settings
37535B
Special Applications > Connecting A GSM Modem
In ToolKit, select
"Communications" window.
open the
Select the modem (this must be installed and configured
under Windows) from the network list, enter the phone
number and click the
nection with the modem.
INSYS Microelectronics provides the application software HS-
COMM to configure the GSM modem for the application.
The following settings show an example for sending an alarm mes‐
sage as a short message.
Descriptions of the individual parameters can be taken
from the operation manual of the modem.
To configure the modem, proceed as follows:
Fig. 175: GSM modem - basic settings
1. Set up the modem as shown in (Fig. 175) on the
Settings" tab.
These settings configure the modem to accept an incoming
call for remote configuration.
The phone number and text can be configured as required.
easYgen-2200/2500 | Genset Control
"Connect..." from the "Device" menu to
"Connect" button to establish a con‐
Application
"Basic
391