Operating Mode Automatic - Woodward easYgen-2000 Series User Manual

Fig. 136: Engine softkey (highlighted)
Overview
Function/Status
Start the engine
Stop the engine
Breaker open command is
issued or a closure of the
breaker is blocked
No defined breaker state
Open the GCB
Close the GCB
Open the MCB
Close the MCB
5.3.3

Operating Mode AUTOMATIC

General usage
37535B
Change Operating Modes > Operating Mode AUTOMATIC
To stop the engine:
Press the button below the black frame next to the engine
symbol.
ð Success: The engine stops and the circular arrow disap‐
pears and the I symbol changes to 0.
Failure: No change in the display until the "stop failure"
message appears.
Symbol
Symbol
Table 64: Status symbols
In the AUTOMATIC operating mode, all engine, GCB, and/or MCB
functions are operated via an interface, or automatically by the
control unit (i.e. a mains failure).
easYgen-2200/2500 | Genset Control
Available in application mode
3 3
3 3
3
3
Description
Generator or mains rotating field moves clockwise.
Generator or mains rotating field moves counter-clockwise.
Power is detected at the respective measuring point (gener‐
ator, busbar, or mains).
Power is imported (at mains interchange).
Power is exported (at mains interchange).
Operation
3 3
3 3
3 3
3 3
3
3
355