Woodward easYgen-2000 Series User Manual page 88

Configuration
Basic Setup > Configure Language/Clock
ID Parameter
4595 DST end nth.
weekday
4596 DST end
month
Example
88
CL Setting range Description
[Default]
2 The order number of the weekday for the DST begin date is configured here.
[1st] DST ends on the 1st configured weekday of the DST begin month.
2nd DST ends on the 2nd configured weekday of the DST begin month.
3rd DST ends on the 3rd configured weekday of the DST begin month.
4th DST ends on the 4th configured weekday of the DST begin month.
Last DST ends on the last configured weekday of the DST begin month.
LastButOne DST ends on the last but one configured weekday of the DST begin month.
LastButTwo DST ends on the last but two configured weekday of the DST begin month.
LastButThree DST ends on the last but three configured weekday of the DST begin month.
Notes
This parameter is only displayed, if Daylight saving time (param‐
eter
2 1 to 12 The month for the DST begin date is configured here.
[1]
Example
n
n
Notes
This parameter is only displayed, if Daylight saving time (param‐
eter
If daylight saving time starts at 2:00 am on the 2nd Sunday in
March and ends at 2:00 am on the 1st Sunday in November, the
unit has to be configured like shown in
configuration example" Table on page 88 to enable an automatic
change to daylight saving time and back to standard time.
ID
4591
4594
4598
4592
4593
4597
4599
4595
4596
Table 40: Daylight saving time - configuration example
easYgen-2200/2500 | Genset Control
4591 Ä p. 86) is set to "On".
1 = 1st month of the year
12 = 12th month of the year
4591 Ä p. 86) is set to "On".
Parameter
Daylight saving time
DST begin time
DST begin weekday
DST begin nth weekday
DST begin month
DST end time
DST end weekday
DST end sunday
DST end month
Ä "Daylight saving time -
Setting
On
2
Sunday
2nd
3
2
Sunday
1st
11
37535B