Application
Special Applications > Connecting An IKD 1 On CAN...
Fig. 165: Baud rate configuration
(example ToolKit)
Fig. 166: Baud rate configuration
(example LeoPC1)
Configuration for a second IKD 1
Fig. 167: TPDO configuration for 2nd
IKD 1 (example HMI)
Fig. 168: TPDO configuration for 2nd
IKD 1 (example ToolKit)
386
1.
In ToolKit configure the baud rate as shown in (Fig. 165).
2.
For the first IKD 1 configure the baud rate as shown in
(Fig. 166).
To connect a second IKD 1 to the easYgen:
1.
Set up TPDO2 for the easYgen on the front panel as shown
in (Fig. 167).
ð Set up TPDO2 for the easYgen in ToolKit as shown in
(Fig. 168).
easYgen-2200/2500 | Genset Control
37535B