Discrete Inputs - Woodward easYgen-2000 Series User Manual

Genset control

Hide thumbs Also See for easYgen-2000 Series:

Table of Contents

Characteristic

Discrete Inputs

General notes

Fig. 52: MPU - characteristic

Fig. 52 shows the minimal necessary input voltage

depending on frequency.

Hazards due to improper implementation of emer‐

Discrete input [DI 01] "Emergency Stop" is only a sig‐

naling input. This input may only be used to signal that

an external emergency stop button has been actuated.

According to EN 60204, this input is not approved to

be used as the emergency stop function.

The emergency stop function must be imple‐

mented external to the control and cannot rely on

the control to function properly.

The discrete inputs are electrically isolated which per‐

mits the polarity of the connections to be either positive

or negative.

All discrete inputs must use the same polarity,

either positive or negative signals, due to the

common ground.

easYgen-2200/2500 | Genset Control

Setup Connections > Discrete Inputs

MPU input - inductive/

MPU input - GND

Installation