External Discrete Inputs - Woodward easYgen-2000 Series User Manual

ID Parameter
4.5.4

External Discrete Inputs

External DI 1
Text 16200
Operation 16001
Delay 16000
Alarm class 16002
Delayed by engine 16003
speed
Self acknowledged 16004
External DI 9
Text 16280
Operation 16081
Delay 16080
Alarm class 16082
Delayed by engine 16083
speed
Self acknowledged 16084
Table 47: External discrete inputs - parameter IDs
37535B
CL Setting range Description
[Default]
[No] The control does not automatically reset the alarm when the fault condition is
no longer detected.
The alarm must be acknowledged and reset by manually pressing the appro‐
priate buttons or by activating the LogicsManager output "External acknowl‐
edgement" (via a discrete input or via an interface).
Notes
If the DI is configured with the alarm class "Control", self acknowledgement is
always active.
If a Woodward IKD 1 or other external expansion board (Phoenix
Contact) is connected to the easYgen via the CAN bus, it is pos‐
sible to use 16 additional discrete inputs.
DI 2 DI 3
16210 16220
16011 16021
16010 16020
16012 16022
16013 16023
16014 16024
DI 10 DI 11
16290 16300
16091 16101
16090 16100
16092 16102
16093 16103
16094 16104
easYgen-2200/2500 | Genset Control
Configure Application > External Discrete Inputs
The configuration of these external DIs is per‐
–
formed similarly to the internal DIs
(Ä Chapter 4.5.3 "Discrete Inputs" on page 215).
Refer to Ä "External discrete inputs - parameter
–
IDs" Table on page 219 for the parameter IDs of
the parameters for external DIs 1 through 16.
DI 4 DI 5
16230 16240
16031 16041
16030 16040
16032 16042
16033 16043
16034 16044
DI 12 DI 13
16310 16320
16111 16121
16110 16120
16112 16122
16113 16123
16114 16124
Configuration
DI 6 DI 7 DI 8
16250 16260 16270
16051 16061 16071
16050 16060 16070
16052 16062 16072
16053 16063 16073
16054 16064 16074
DI 14 DI 15 DI 16
16330 16340 16350
16131 16141 16151
16130 16140 16150
16132 16142 16152
16133 16143 16153
16134 16144 16154
219