Service Port - Woodward easYgen-2000 Series User Manual

3.2.15

Service Port

Service port connector
Fig. 65: Service port connector
Direct configuration cable (DPC)
DPC-USB direct configuration
cable
Fig. 66: DPC-USB wiring - schematic
DPC-RS-232 direct configuration
cable
37535B
The Woodward specific service port is a connector (RJ-45) to
extend the interfaces of the controller.
The service port can be only used in combination with
an optional Woodward direct configuration cable
(DPC).
(RJ-45)
The DPC cable is used to configure the device with the ToolKit
configuration software and external extensions/applications.
There are two versions available:
DPC-USB direct configuration cable
n
DPC-RS-232 direct configuration cable
n
Use the DPC-USB direct configuration cable if you want to connect
the Woodward controller to an external device (master) which is
equipped with an USB port.
Order item number:
DPC-USB direct configuration cable – P/N 5417-1251
n
Use the Ethernet CAT 5 cable which is supplied with
1
the DPC-USB converter. The maximum cable length
must not exceed 0.5 m.
Use the DPC-RS-232 direct configuration cable if you want to con‐
nect the Woodward controller to an external device (master) which
is equipped with an RS-232 port.
Order item number:
DPC-RS-232 direct configuration cable – P/N 5417-557
n
easYgen-2200/2500 | Genset Control
Installation
Setup Connections > Service Port
79