J1939 Interface - Woodward easYgen-2000 Series User Manual

Configuration
Configure Interfaces > CAN Interface 2 > J1939 Interface
ID Parameter
4.6.2.2

J1939 Interface

General notes
ID Parameter
15102 Device type
318
CL Setting range Description
[Default]
Instructions
Proceed as follows to configure an external device:
n
n
n
n
Notes
This parameter can only be used to configure a Phoenix expansion board.
Refer to the IKD 1 Manual 37135 for configuring the IKD 1 expansion boards.
CL Setting range Description
[Default]
2 The J1939 interface of this device may be operated with different engine con‐
trol units or analog input devices.
This parameter determines the type of the used ECU.
Off The J1939 interface is disabled. No messages will be received.
[Standard] Standard J1939 coupling is enabled: J1939 data is displayed according to the
SAE J1939 standard.
This setting must be configured for all J1939 ECUs, which cannot be selected
here (e.g. Deutz (EMR3 & EMR4), John Deere, Daimler, Perkins, Iveco, Cat‐
erpillar, Liebherr, etc.).
Please refer to
S6 Scania The Scania EMS/S6 ECU is enabled: J1939 data according to the SAE J1939
standard and some S6-specific data are considered.
EMR2 Deutz The Deutz EMR2 ECU is enabled: J1939 data according to the SAE J1939
standard and some EMR2-specific data are considered.
This setting is also recommended for Volvo EDC4.
EMS2 Volvo The Volvo EMS2 ECU is enabled: J1939 data according to the SAE J1939
standard and some EMS2-specific data are considered.
This setting is also recommended for Volvo EDC3 and EMS1.
ADEC ECU7 The MTU ADEC ECU7 with SAM is enabled: J1939 data according to the
MTU SAE J1939 standard and some ADEC-specific data are considered.
EGS Woodward The Woodward EGS ECU is enabled: J1939 data according to the
SAE J1939 standard and some EGS-specific data are considered.
easYgen-2200/2500 | Genset Control
Connect external device
Configure parameters at the easYgen (Node-ID, DI/Os, AI/Os)
Set this parameter to "Yes"
Verify the successful configuration of the external device
For additional information refer to Ä Chapter 7.5 "
J1939 Protocol" on page 456.
Ä Chapter 7.5 " J1939 Protocol" on page 456 for details.
37535B