Application
Special Applications > Start/Stop Logic Mode "Off"
6.4.10.1
Configure External Inputs/Outputs (Phoenix)
Configure external DI
Configure external DO
Fig. 192: LogicsManager
6.4.11
Start/Stop Logic Mode "Off"
General notes
400
Fig. 190: Setup of external DIs
Set up the external discrete inputs using the ToolKit screen
shown in (Fig. 190).
Fig. 191: Setup of external DOs
1.
Set up the external discrete outputs using the ToolKit screen
shown in (Fig. 191).
"Edit" to open the respective LogicsManager screen of
2.
Click
each output.
The start/stop sequence in the easYgen is completely disabled.
This function is needed in applications where the control of the
start/stop logic is completely done by an external device (e.g.
PLC).
easYgen-2200/2500 | Genset Control
37535B