Woodward easYgen-2000 Series User Manual page 75

Wiring 0 to 20 mA senders (single-
or two-pole)
37535B
Fig. 60: Analog inputs - wiring single- and two-pole senders
Terminal Description
54 Power supply 0 Vdc
53 Power supply 12/24 Vdc (8 to 40.0 Vdc)
10 Analog input [AI 01/02/03] ground
11 Analog input [AI 01]
12 Analog input [AI 02]
13 Analog input [AI 03]
Table 31: Wiring single and two-pole senders simultaneously
Terminal Description
67 Analog input [AI 04] ground, connected to 0 Vdc (terminal
54)
68 Analog input [AI 04]
Table 32: Wiring single and two-pole senders simultaneously
(easYgen-2500 P1 only)
The 0 to 20 mA inputs can be used for one or two pole senders.
easYgen-2200/2500 | Genset Control
Installation
Setup Connections > Analog Inputs
A
max
2.5 mm²
2.5 mm²
2.5 mm²
2.5 mm²
2.5 mm²
2.5 mm²
A
max
2.5 mm²
2.5 mm²
75