Analog Outputs - Woodward easYgen-2000 Series User Manual

Installation
Setup Connections > Analog Outputs
3.2.13

Analog Outputs

Controller wiring
Fig. 62: Analog controller output -
76
Fig. 61: Analog inputs (0 to 20 mA) - wiring single- or two-pole
senders
Terminal Description
54 Power supply 0 Vdc, unused
53 Power supply 12/24 Vdc (8 to 40.0 Vdc), unused
10 Analog input [AI 01/02/03] ground
11 Analog input [AI 01]
12 Analog input [AI 02]
13 Analog input [AI 03]
Table 33: Wiring 0 to 20 mA senders
Terminal Description
67 Analog input [AI 04] ground
68 Analog input [AI 04]
Table 34: Wiring 0 to 20 mA senders (single- or two-pole)
Controller configuration and an external jumper can change the
multifunction controller bias output signals. The analog outputs are
galvanically isolated.
Type Terminal
I A
Current
B
wiring
C
easYgen-2200/2500 | Genset Control
Descrip‐
tion
1 IA Analog
output [AO
2
01]
3 GND
A
max
2.5 mm²
2.5 mm²
2.5 mm²
2.5 mm²
2.5 mm²
2.5 mm²
A
max
2.5 mm²
2.5 mm²
A
max
2.5 mm²
2.5 mm²
2.5 mm²
37535B