Back Window Components (Sedan Model); Back Window Removal And Installation (Sedan Model) - Suzuki SX4 Service Manual

Back Window Components (Sedan Model)

1
2
1. Back window

Back Window Removal and Installation (Sedan Model)

Refer to "Windshield Removal and Installation" as preparation, removal and installation procedures are basically the
same. However, note the following.
• Observe the following precautions when applying adhesive (1) along glass (2) edge.
• Adhesive (1) should be applied evenly especially in height.
• Be careful not to damage primer (3).
• Press glass against body quickly after adhesive (1) is applied.
Adhesive amount specifications and position for back window
Width "a": 7.0 mm (0.28 in.)
Width "b": 7.4 mm (0.29 in.)
Height "c": 13.0 mm (0.51 in.)
Height "d": 12.3 mm (0.48 in.)
Position "e": 6.0 mm (0.24 in.)
Position "f": 10.4 mm (0.41 in.)
Position "g": 6.3 mm (0.25 in.)
Width "h": 14.0 mm (0.55 in.)
4
2
"c"
2
4
2. Back window spacer
"e"
"a"
3
1
"h"
"f"
"a"
"c"
3
1
"h"
4. Back window molding
Glass / Windows / Mirrors:
3
3. Back window molding
9E-13
S7RW0A9506029
I6RW0B950001-01
4. Fastener
S7RW0A9506030
"g"
2
4
"b"
"d"
3
1
"h"
I6RW0B950002-01