Avaya Communication Manager Administrator's Manual page 1263

Cut-Through
This field appears when the
!
SECURITY ALERT:
Entering y in this field will reduce your ability to prevent toll fraud.
Valid entries
y
n
Cyclical Hunt
When a call is offered to a trunk group, Communication Manager searches for an available trunk. This
field, which appears when the Direction field is two-way and the Trunk Type field is loop-start, controls
the starting point of this search.
You can change this field from n to y at any time. To change from y to n, however, all the trunks in the
group must be idle or busied out.
Valid entries
y
n
Administrator's Guide for Avaya Communication Manager
November 2003
Outgoing Dial Type
Usage
Enter y to allow users to get dial tone directly from the central
office. Outgoing calls over this trunk group will bypass AAR/ARS
(if you're using it) and any of your administered restrictions (such
as COR or FRL).
Enter n and the user will receive switch dial tone. Instead of digits
being sent to the central office, they will be collected and checked
against administered restrictions. If no restrictions apply, the digits
are sent to the central office.
Usage
Enter y to have Communication Manager start its search from the
last trunk seized. This method is faster, and thus better suited for
high-traffic trunk groups.
Enter n to have Communication Manager start each search at
member 1 (the first trunk administered on the Group Member
Assignments page).
field is either rotary or tone.
Screen Reference
Trunk Group
1263