Avaya Communication Manager Administrator's Manual page 1383

For a tandem call that uses different types of incoming and outgoing trunks, the switch uses:
•
the incoming trunk's COR -assigned call type for Russian or R2-MFC outgoing trunks
•
ARS call types for MFE outgoing trunks
Interactions
•
Attendant Console
If an attendant extends a call, the attendant's COR is used to select ANI.
•
Authorization Codes
The authorization code COR is not used to select the ANI. The extension's ANI is used if an
extension originates the call, and the ANI for the switch is used if the originating endpoint is an
incoming trunk.
•
Bridged Call Appearance
A call from a bridged call appearance uses the ANI of the primary extension.
•
Call Vectoring
The ANI of the originating party is used, not the ANI of the call vector, when a call vectoring
route-to command routes a call over an outgoing trunk.
•
Distributed Communications System (DCS)
In a DCS, the ANI sent to the CO is determined by the ANI for PBX on PBX_B, but the category
sent to the CO is determined by the
for the incoming DCS trunk or by the type of call.
•
Expert Agent Selection (EAS)
The EAS agent's login extension and COR is used to determine ANI.
•
Hunt Groups and Automatic Call Distribution (ACD) Splits
The phone's extension and COR is used to determine ANI for a hunt group or ACD split.
•
Multimedia Call Handling (MMCH)
For call origination, multimedia complexes use the COR assigned to their phones.
•
Personal Station Access (PSA)
For ANI, the PSA extension and COR overrides the phone's extension and COR.
•
Remote Access
A remote access barrier code COR is not used for ANI. The extension's ANI is used if an
extension originates the call, and the ANI for the switch is used if the originating endpoint is an
incoming trunk.
Related topics
See Displaying ANI Calling Party Information
the U.S.
See Multifrequency signaling
See CLAN and processor CLAN QoS and CIDR support
Restriction.
Administrator's Guide for Avaya Communication Manager
November 2003
Category for MF ANI
on page 157 for instructions on setting up ANI display in
on page 1610 for more information on signaling.
Automatic number identification
field on the Class of Restriction screen
on page 1493 for more information on Class of
Feature Reference
1383