Flashhook Interval - Avaya Communication Manager Administrator's Manual

Flashhook Interval

Valid entries
y
n
Forward Disconnect Timer (msec)
Valid entries
25 to 1500 (in
increments of
25).
Lower Bound (msec)
The lower bound of the station-to-switch recall signal timing interval in milliseconds. Specifies the lower
bound of the flashhook interval. Appears when the
Valid entries
80 to 1250 (in
increments of
10).
MF Interdigit Timer (sec)
Applies only to multifrequency signaling trunks. Specify the maximum number of seconds
Communication Manager will wait for the first forward signal (digit) to arrive, and for subsequent digits
to arrive. Intercept returns to the calling party if this timer expires.
Valid entries
1 to 255
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Enter y to indicate that a flashhook interval (recall window) is
required. If a y is entered, Upper Bound
appear.
If n is entered,
Disconnect Timing
Usage
Specify the duration of a momentary disconnect sent by the
server/switch to an analog station user when that user is the last
party still off-hook on a call.
Usage
Usage
This number must be less than the number of seconds entered in
the short interdigit timer.
and Lower Bound
appears.
field is y.
Flashhook Interval
Screen Reference
Location Parameters
1047