Avaya Communication Manager Administrator's Manual page 1204

Screen Reference
System Parameters Country-Options
Dial Tone Validation Timer (sec)
Displays number of milliseconds that the dial tone validation routine will use to sample
transmissions. This field appears only when
TN420C or later Tone Detector circuit pack.)
Valid entries
0 – 6375 in
increments of
25
Disconnect on No Answer by Call Type
Drops outgoing trunk calls (except DCS and AAR) that users leave unanswered too long.
Valid entries
y/n
Display Character Set
Appears only for 607, 46xx, 64xx, and 84xx telephone sets.
Valid entries
cyrillic
katakana
roman
ukranian
Enable Busy Tone Disconnect for Analog
Loop-start Trunks
This field allows Communication Manager to recognize a busy tone from the central office as a
disconnect signal.
Valid entries
y/n
1204
Usage
Usage
Enables the system to disconnect calls that are not answered.
Usage
Indicate the enhanced character set to display. See
Telephone Display for more information.
NOTE:
Cyrillic, Roman, and Ukranian map to the Eurofont
character set.
Usage
Enter y to allow Communication Manager to disconnect the trunk
when a busy tone is received from the central office.
Administrator's Guide for Avaya Communication Manager
is equal to
Tone Detection Mode
.
Enhanced
4 or 5 . (Valid with
November 2003