Avaya Communication Manager Administrator's Manual page 817

Abbreviated Dial Programming by Assigned
Lists
Valid entries
y
n
ACA Referral Calls
Indicates where ACA referral calls generate. This field only appears when the
Assurance (ACA) Enabled
Valid entries
local
primary
remote
ACA Referral Destination
The specified extension should be equipped with a display module. This field only appears if ACA
Referral Calls is local or primary.
Valid entries
An extension
attd
ACA Remote PBX Identification
This field only appears if
Valid entries
1–63
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Enter y to allow programming by station's assigned list.
Enter n if using Program Access code to indicate which personal
list is to be programmed.
field is y.)
Usage
Local referral calls generate on and for the local switch.
Primary referral calls generate on the local switch for remote
servers/switches as well as the local switch.
Remote referral calls generate at another server in a DCS network.
In this case, the remote node number must also be entered. The
remote node number is the same node number as defined on the
Dial Plan screen. Also, ACA button status transmits to other
servers/switches when in a DCS network.
Usage
Enter the extension on a local server running Communication
Manager that is to receive the ACA referral call.
Enter attd for attendant.
is remote.
ACA Referral Calls
Usage
Enter a number to identify the switch in a DCS network that makes
the referral call. Do not define the remote server/switch identified in
this field as local on the system's Dial Plan screen.
Screen Reference
Feature-Related System Parameters
Automatic Circuit
817