Location Parameters - Avaya Communication Manager Administrator's Manual

Timezone Offset
Timezone Offset
differs from the system time. This field must be completed for each administered location. Use +00:00
for the time zone offset for a single location media server.
Valid entries
+
-
Valid entries
0 to 23
Valid entries
0 to 59
Lo

Location Parameters

The Location Parameters screen allows you to set or change certain administerable characteristics that
determine part of a location's behavior. These include recall timing intervals and loss plans for 2-party
and conference calls.
Figure 298: Location Parameters
change location-parameters
Analog Ringing Cadence: 1
Analog Line Transmission: 1
RECALL TIMING
Disconnect Timing (msec)
Forward Disconnect Timer (msec): 600
Outgoing Shuttle Exchange Cycle Timer:
Administrator's Guide for Avaya Communication Manager
November 2003
is actually 3 fields (+/-, hour, and minute) that specify how much time each location
Usage
Shows that the time set on this location is a certain amount of time
ahead of the system time.
Shows that the time set on this location is a certain amount of time
behind the system time.
Usage
Shows the number of hours difference between this location and
system time.
Usage
Shows the number of minutes difference between this location and
system time.
LOCATION PARAMETERS
Companding Mode: Mu-Law
Flashhook Interval? y
150
MF Interdigit Timer (msec):
Page 1 of 4
Upper Bound (msec) 1000
Lower Bound (msec)
10
4
Screen Reference
Location Parameters
200
1045