Avaya Communication Manager Administrator's Manual page 952

Screen Reference
IP-Options System Parameters
H.248 MEDIA GATEWAY
Link Loss Delay Timeout (minutes)
This field is to assist with the H.248 link bounce recovery mechanism of the Avaya G700 Media
Gateway; specifically, to prevent the call controller from removing all boards and ports prematurely in
response to a link bounce.
Valid entries
1 through 30
H.323 IP ENDPOINT
Link Loss Delay Time (minutes)
This timer specifies how long the Communication Manager server preserves registration and any stable
calls that may exist on the endpoint after it has lost the call signaling channel to the endpoint. If the
endpoint does not re-establish connection within this period, MV tears down the registration and calls (if
any) of the endpoint. This timer does not apply to soft IP endpoints operating in telecommuter mode..
Valid entries
1 through 60
Primary Search Time (seconds)
While the telephone is hung-up, this is the maximum time period that the IP endpoint expends attempting
to register with its current Communication Manager server. The need for this timer arises in situations
where the current MV server may have a large number of C-LANS. this timer allows the customer to
specify the maximum time that an IP endpoint spends on trying to connect to the C-LANS before going
to an LSP.
While the IP Tlelphone's receiver is lifted, the endpoint continues trying to re-establish connection with
the current server until the call ends..
Valid entries
15 through 3600
952
Usage
Enter the number of minutes to delay the reaction of
the call controller to a link bounce. Default is 5
Usage
Enter the number of minutes to delay the reaction of
the call controller to a link bounce. Default is 5
Usage
Enter the number of seconds an IP endpoint spends on
trying to connect to the C-LANS before going to an
LSP. Default is 75.
Administrator's Guide for Avaya Communication Manager
November 2003