Avaya Communication Manager Administrator's Manual page 898

Screen Reference
Hunt Group
(Calls Warning) Port
Appears if the
Queue
external Auxiliary Queue Call Warning Threshold lamp that will flash when the number of calls in queue
has exceeded the queue warning threshold (assigned in
This port is assigned to an Analog Line circuit pack or given an "X" designation if an extension is used.
Enter the necessary characters.
Valid entries
01 through 44
(DEFINITY R) or
01 through 03
(DEFINITY CSI, SI) or
1 through 64
(S8700 IP-Connect / S8700
Multi-Connect / S8300 Media
Server)
A through E
0 through 20
01 through 04
(Analog TIE trunks)
01 through 31
NOTE:
For example, 01A0612 is in cabinet 01, carrier A, slot 06, and circuit number (port) 12.
COR
Enter the class of restriction (COR) number that reflects the desired restriction for the hunt group. If this
is a hunt group supporting the AUDIX in a DCS feature, the CORs on the Hunt Group screen on each
server running Communication Manager must be the same.
Valid entries
0 to 95
Coverage Path
Enter a coverage path number. This assigns a coverage path for the hunt group. The coverage path is
assigned using the Coverage Path screen. Does not appear if the
Valid entries
1 to 999
t1 to t999
blank
898
field is y. Enter the seven-character port number assigned to connect the optional
Usage
First and second characters are the cabinet number
Third character is the carrier
Fourth and fifth character are the slot number
Six and seventh characters are the circuit number
Usage
Usage
Time of day table
Administrator's Guide for Avaya Communication Manager
Calls Warning Threshold ).
Vector field is y
November 2003