Avaya Communication Manager Administrator's Manual page 972

Screen Reference
ISDN Trunk Group
Codeset to Send National IEs
This field defines the codeset for sending the information element (IE) for national IEs. National IEs
include all IEs previously sent only in code set 6 (such as DCS IE). Now these national IEs, including
Traveling Class Marks (TCMs) and Lookahead Interflow (LAI), can be sent in code set 6 or 7. The value
depends on the type of server/switch the user is connected to.
Valid entries
6
7
NOTE:
A Traveling Class Mark (that is, the user's FRL or the user's trunk group FRL) is passed
between tandem nodes in an ETN in the setup message only when the Service Type field
is tandem. It then is used by the distant tandem switch to permit access to facilities
consistent with the originating user's privileges.
Digit Handling (in/out)
This field defines whether overlap receiving and overlap sending features are enabled. Set the field to
overlap when you want overlap receiving or overlap sending. Set to enbloc when you do not want these
features enabled. The first field value indicates digit receiving and the second value indicates digit
sending.
Valid entries
enbloc/enbloc
enbloc/overlap
overlap/enbloc
overlap/overlap
Without overlap receiving or sending enabled, the digits on incoming and outgoing calls are sent enbloc.
If the Digit Handling field is overlap/enbloc or overlap/overlap, the following results:
•
Incoming Call Handling Treatment table does not appear
•
The Digit Treatment
•
Warning message indicates that all Incoming Call Handling entries are removed when screen is
submitted
•
When screen is submitted with these values, all Incoming Call Handling entries are removed
972
Usage
Other types.
System 85 R2V4, 4E11, or newer media server/switch types
Usage
and Digits fields appear
Administrator's Guide for Avaya Communication Manager
November 2003