Avaya Communication Manager Administrator's Manual page 984

Screen Reference
ISDN Trunk Group
Network Call Redirection
Administrable if, on the System-Parameters Customer-Options screen, the
Trunks field is y, the
the Supplementary Service Protocol field is c or g. Whenever the Supplementary Service Protocol field is
changed, this field resets to none to prevent an inadvertent incorrect value,
Valid entries
ANSI-transfer
Nortel-transfer
deflect
none
Send Name
Specifies whether the calling/connected/called/busy party's administered name is sent to the network on
outgoing/incoming calls. Valid entries are y, n, or r (restricted). The value r indicates that the
calling/connected name will be sent by Avaya Communication Manager, but will be marked
"presentation restricted." This value is valid only if the Supplementary Service Protocol field is a
(national supplementary service), b (for called/busy only) or d for the QSIG Global Networking
Supplementary Service Protocol. When the Supplementary Service Protocol field is e (DCS with
Rerouting), only values of y and n are permitted.
NOTE:
If name information is not administered for the calling station or the
connected/called/busy station, the system sends the extension number in place of the
name.
Send UCID
Specifies whether or not the trunk should transmit Universal Call IDs. The valid entries are y and n.
Send UUI IE
Specifies whether to block sending UUI information on a per trunk group basis. The valid entries are y
and n.
984
ISDN Network Call Redirection
Usage
Indicates standard ANSI encoding functionality. Allowed only if
the Supplementary Service Protocol field is g.
Indicates non-standard ENCT functionality. Allowed only if the
Supplementary Service Protocol field is g.
Indicates network call redirection. Allowed only if the
Supplementary Service Protocol field is c.
No redirection (default).
Administrator's Guide for Avaya Communication Manager
ISDN-PRI
field is y, and on the ISDN Trunk Group screen,
or
ISDN-BRI
November 2003