Isdn Numbering - Private - Avaya Communication Manager Administrator's Manual

The total number of pages, and the first page of Group Member Assignments, will vary depending on
whether the CBC and Wideband Support pages display.
NOTE:
When supporting DCS, Member Number Assignments must be the same between nodes
(Member #1 must be Member #1 at the far-end trunk group).
Port
When using ISDN-BRI interfaces, B-channel 1 is the port number while B channel 2 is the port number
plus 16. For example, if B channel 1's port number is 01A1002, then B channel 2's port number is
01A1018.
When using ISDN-PRI interfaces, the port number will be the one allied with the B-channel. For
example, if the DS1 is located in 01A10, then B channel 1 will be 01A1001, B channel 2 will be
01A1002 and so forth.
Sig Grp
When using ISDN-BRI interfaces, this field becomes unadministrable. Otherwise, enter the appropriate
signaling group number. If a DS1 interface appears in one signaling group, then the number of that
signaling group appears as a default in the Sig Grp column for any trunk on that interface after the screen
is submitted. This value cannot be altered without adding a DS1 interface to another signaling group. If a
DS1 circuit pack appears in more than one signaling group, then the Sig Grp field cannot be left blank.
One of the signaling group members must be entered. Enter assigned signaling group number between 1
through 416 or blank. A signaling group cannot be used for both
is, all members of any trunk group used for SBS signaling must be assigned a unique signaling group
number.) Also, SBS trunk group members cannot be associated with a signaling group that is connected
to an Avaya Remote Office.
Related topics
See ISDN service
trunks.
See DS1 trunk service
ISDN Numbering — Private
This screen supports Private Numbering Plans (PNP). It allows you to specify the digits to be put in the
Calling Number information element (IE), the Connected Number IE, and the QSIG Party Number for
extensions in the Private Numbering Plan.
Avaya Communication Manager supports private-network numbers up to 15 digits long. If the total
number — including the level 1 and 2 prefixes, the PBX identifier, and the extension — is more than 15
digits long, neither QSIG Party Numbers nor the information elements are created or sent.
Administrator's Guide for Avaya Communication Manager
November 2003
on page 1579 for detailed information about Integrated Services Digital Network
on page 1514 for detailed information on DS1.
Screen Reference
ISDN Numbering — Private
SBS and non-SBS trunk groups. (That
995