Avaya Communication Manager Administrator's Manual page 1087

Number of Outgoing ANI Digits
This field applies to Russian shuttle trunks, and MFC and MFE trunks.
Valid entries
0 to 15
Request Call Category at Start of Call
Indicates that the Send-ANI backward signal requesting for the caller-category information will be
sequenced differently in the MFC signaling flow. The Caller-category Request backward signal is
disjointed from the ANI request.
Valid entries
y/n
Request CPN at Start of Call
This field appears only if the Incoming Call Type field is group-ii-mfc. Provides for Communication
Manager to collect ANI and call category immediately after receipt of the first address digit.
Valid
entries
y/n
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Enter the number of ANI digits for outgoing MFC calls.
In India or any country where end-of-ani and end-of-digits are not
defined for Tones to CO on Outgoing Forward Calls – Group I,
Avaya Communication Manager appends ANI-Not-Available digits
to ANI digits if the actual ANI length is less than the number entered
in this field.
If end-of-ani or end-of-digits are defined, this field is used in
conjunction with Truncate Station Number in ANI as a maximum
ANI length.
For India, even if the length of ANI is defined, if the timeout occurs
during the ANI collection, the call is routed with the ANI digits
already collected.
Usage
If y, the Send-ANI backward signal corresponds exclusively to the
caller-category request. In response to this signal, Avaya
Communication Manager sends a forward signal containing the
caller-category information on outgoing calls. On incoming calls,
Communication Manager sends the Send-ANI backward signal upon
receipt of the first address signal.
Usage
If y, provides ANI (Calling Party Number (CPN) and call category)
immediately after receiving the first address digit.
Screen Reference
Multifrequency-Signaling-Related Parameters
1087