Avaya Communication Manager Administrator's Manual page 772

Screen Reference
Dial Plan Analysis Table
Dialed String
The dialed string contains the digits that Avaya Communication Manager will analyze to determine how
to process the call. This field allows you to enter up to four digits, so you can allocate blocks of 1000
numbers even when using a 7-digit dial plan.
Valid
entries
0–9, * and #
Percent Full
Displays the percentage (0 to 100) of the system's memory resources that have been allocated for the dial
plan that are currently being used.
Total Length
Valid
entries
1–2 for attd
1–4 for dac
1–4 for fac
1–7 for ext
2–6 for pext
772
Usage
Enter any combination of 1 to 4 digits. the following restrictions
apply:
•
The digits * and # may only be used as first digits, and only
for the Call Types fac and dac.
•
For Call Type attd, if the Total Length is 2, the Dialed String
must be 2 digits long.
•
Two Dial Plan entries can use the same Dialed String only if
the Dialed String is 1 digit long. Longer Dialed Strings must
all be unique.
•
A new entry cannot be administered if it causes an existing
extension, feature access code, or trunk access code to
become inaccessible.
Usage
Enter the number of digits for this call type. The allowed length varies
by call type. This must be greater than or equal to the number of digits
in the Dialed String.
Administrator's Guide for Avaya Communication Manager
November 2003