Avaya Communication Manager Administrator's Manual page 889

Custom Selection of VIP DID Numbers
This field allows you to select the DID number assigned to a room when a guest checks in. This field can
be accessed only if the
Valid entries
y/n
Daily Wakeup
Valid entries
y/n
Default Announcement Extension
This field appears only when the
wakeup announcement extension when using the integrated announcement circuit pack.
Valid entries
valid extension or VDN
Digit to Insert/Delete
Enter the leading digit that may be deleted and inserted back as described in the following text. The
current PMS message set uses the extension number as the room identifier. In many customer
configurations, the leading digit of the extension number is dropped to screen the room number. In order
to accommodate PMS devices that are based on room number and not extension, this leading digit may be
deleted on messages from Avaya Communication Manager to the PMS, and then inserted back on
messages from the PMS to Communication Manager.
NOTE:
The PMS interface supports 3-, 4-, or 5-digit extensions, but prefixed extensions do not
send the entire number across the interface. Only the assigned extension number is sent.
Therefore, you should not use prefixed extensions for numbers that are also going to use
the Digit to Insert/Delete function.
Valid entries
0 to 9
Administrator's Guide for Avaya Communication Manager
November 2003
Automatic Selection of DID Numbers
Usage
Enter y to allow you to select the DID number assigned to a room
when a guest checks in.
Usage
Enter y if each extension can request daily wakeup calls.
Announcement Type
Usage
Enter the extension of the announcement you want to
use for default wakeup calls.
Usage
field is y.
field is mult-integ. This indicates the default
Screen Reference
Hospitality
889