Avaya Communication Manager Administrator's Manual page 1304

Screen Reference
Trunk Group
Glare
This field is only administrable if the
two-way or outgoing. Only TN2140 ports receive this timer.
Valid entries
40 to 100 in
increments of
10
Incoming Dial Guard (msec
Valid entries
10 to 2550 in
increments of
10
NOTE:
This timer is never sent to TN429 ports.
Incoming Disconnect (msec)
The field appears only when the Direction field is incoming or two-way and the
either blank or cont.
Valid entries
50 to 2550 in
increments of
10
Incoming Disconnect Send (msec)
This field is only administrable if the
incoming or two-way. Only TN2140 ports receive this timer.
Valid entries
500 to 1200 in
increments of
100
1304
Trunk Type
Usage
Enter the minimum acceptable interval (in msec) between the
moment your server running Communication Manager sends an
outgoing seizure and the moment it receives a seizure
acknowledgment. If acknowledgment is received before the timer
expires, glare is assumed.
)
Usage
Enter the minimum acceptable interval between the detection of an
incoming seizure and the acceptance of the first digit.
Communication Manager will not accept digits before this timer
expires.
Usage
Enter the minimum valid duration of a disconnect signal for an
incoming call. Avaya Communication Manager will not recognize
shorter disconnect signals. This field cannot be blank. For Brazil
pulsed E&M signaling, use 600.
Trunk Type
Usage
Enter the duration of the backward release signal your server
running Communication Manager sends at the end of an incoming
call.
Administrator's Guide for Avaya Communication Manager
field is cont and the trunk group
field is dis and the trunk group
field is
Direction
field is
Trunk Type
Direction field is
November 2003