Avaya Communication Manager Administrator's Manual page 993

Plan #
Specifies the number of the usage allocation plan that will be in effect from the activation time until the
activation time of the next scheduled plan change. Valid entries are 1 to 3 or blank.
Scheduled
Indicates whether or not the allocation plans will be in effect according to the schedule found on this
page. If y is entered in this field then there must be at least one entry in the schedule.
Field descriptions for the Wideband Support
Options page
Figure 228: Wideband Support Options
add trunk-group next
The Wideband Support Options screen appears immediately before the trunk group member pages. The
actual page number will vary.
NOTE:
All B-channels that comprise the wideband call must reside on the same ISDN-PRI
facility. Also, all trunk members in an ISDN trunk group with the Wideband Support field
set to y must be from a TN464C (or later) circuit pack.
H0
Enter y to specify the ISDN information transfer rate for 384-kbps of data, which is comprised of six
B-channels. When a trunk group is administered to support H0, the trunk/hunt algorithm to satisfy a call
requiring 384-kbps of bandwidth uses a fixed allocation scheme.
H11
Enter y to specify the ISDN information transfer rate for 1536-kbps of data, which is comprised of 24
B-channels. When a trunk group is administered to support H11, the trunk/hunt algorithm to satisfy a call
requiring 1536-kbps bandwidth uses a fixed allocation scheme.
Administrator's Guide for Avaya Communication Manager
November 2003
Wideband Support Options
H0? n
H11? n
H12? n
NxDS0? y Contiguous? n
Screen Reference
ISDN Trunk Group
Page y of x
993