Avaya Communication Manager Administrator's Manual page 1092

Screen Reference
Multifrequency-Signaling-Related Parameters
Field descriptions for page 4
The fields shown on this page define the meaning of MFC tones for calls originated at the PBX. See
Definitions of Group I, II, A, and B signals
Page 4 of the Multifrequency-Signaling-Related System Parameters screen only appears if
is group-ii-mfc or mfe.
Call Type
Figure 313: Multifrequency-Signaling-Related System Parameters screen
change system-parameters multifrequency-signaling
OUTGOING FORWARD SIGNAL TYPES
(Tones to CO)
Group-I
11: ______________
12: ______________
13: ______________
14: ______________
15: ______________
OUTGOING FORWARD SIGNAL TYPES (Tones
to CO)
Group I
Message codes 11 to 15 appear. (Numbers 1 through 10 are assigned to the digits of the destination
telephone number.)
Valid entries
end-of-digits
ani-avail
end-of-ani
ani-not-avail
1092
on page 1094 for more information.
MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
Group-II
2: normal
5: attendant
6: data-call
__: ______________
__: ______________
__: ______________
__: ______________
__: ______________
__: ______________
__: ______________
__: ______________
__: ______________
__: ______________
__: ______________
__: ______________
Usage
Assign a meaning to each code. See
and B signals on page 1094 for signal type.
Administrator's Guide for Avaya Communication Manager
OUTGOING BACKWARD SIGNAL TYPES
(Tones from CO)
Group-A
1: next-digit 1: free
2: congestion 2: busy
3: end-of-dial 3: congestion
4: congestion 4: congestion
5: call-info-ani 5: congestion
6: congestion 6: free
7: last-2-digits 7: intercept
8: last-3-digits 8: congestion
9: congestion 9: congestion
10: congestion 10: congestion
11: congestion 11: congestion
12: congestion 12: congestion
13: congestion 13: congestion
14: congestion 14: congestion
15: congestion 15: congestion
Definitions of Group I, II, A,
Outgoing
Page 4 of 4
Group-B
November 2003