Avaya Communication Manager Administrator's Manual page 796

Screen Reference
DS1 Circuit Pack
Block Progress Indicator
This field allows you to block sending of the progress indicator in the SETUP message. It appears when
the Country Protocol
Valid entries
y
n
Field descriptions for page 2
Figure 169: DS1 Circuit Pack
add ds1 xxxxxx
ESF DATA LINK OPTIONS
Send ANSI-T1.403 One-Second Performance Reports?
INTEGRATED CSU OPTIONS
CPE LOOPBACK JACK OPTIONS
CAUTION:
Customers: Do not change fields on this page without assistance from Avaya or your
network service provider.
Page 2 does not appear for all DS1 circuit packs. For those circuit packs that support it, this page appears
only when the
Framing Mode
796
field is set to 1 and the Protocol Version
Usage
Enter y(es) to prevent the progress indicator from being sent in the
SETUP message.
Enter n(o) to allow the progress indicator to be sent.
DS1 CIRCUIT PACK
Network Management Protocol:
Far-end CSU Address:
Supply CPE Loopback Jack Power?
field is esf or the
Near-end CSU Type
Administrator's Guide for Avaya Communication Manager
field is set to b.
Transmit LBO:
Receive ALBO:
Upon DTE LOS:
field is integrated.
November 2003