Avaya Communication Manager Administrator's Manual page 1325

Valid entries
1 through 250
(S8700 IP-Connect / S8700
Multi-Connect / S8300 Media
Server)
V1 through V9 (DEFINITY
R, CSI, SI, S8700
IP-Connect, S8700
Multi-Connect)
01 through 31 (DEFINITY R,
CSI, SI, S8700 IP-Connect,
S8700 Multi-Connect)
NOTE:
In DCS networks, trunks must be assigned the same member number at both nodes.
NOTE:
Members assigned to IP trunk groups will display a value of
Sfx
This display-only field shows the model suffix for the type of circuit pack physically installed at the
location to which this member is assigned. If no circuit pack is installed at the port address you enter, the
field is blank.
Total Administered Members
This display-only field shows the total number of members administered in the trunk group.
Type
The Type column appears when the Trunk Type field is blank or cont. The Type column does not display
if the Trunk Type field is dis.
This field specifies the signaling type to be used with TN760B (or later release), TN722 (with any suffix),
TN767, TN2140 (when the Trunk Type field is cont), TN437, TN439, TN464 with any suffix, or TN458
circuit packs.
CAUTION:
Customers should not attempt to administer this field. Please contact your Avaya
representative for assistance.
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Gateway
Module
Circuit
Screen Reference
Trunk Group
.
T00001
1325