Avaya Communication Manager Administrator's Manual page 1312

Screen Reference
Trunk Group
Make (msec)
Valid entries
Enter the duration of the make interval (the pause between pulses) while the system is
outpulsing digits using dial pulse signaling. The field cannot be blank.
20 to 80 in
increments of 5
10 to 40 in
increments of 5
PPM
For CO, DIOD, FX, PCOL, and WATS trunks. This field appears when the Direction field is outgoing or
two-way.
Valid entries
y/n
PPS
Valid entries
10
20
NOTE:
The TN439, TN458, TN497, TN747Bv12 (or later), and TN767 circuit packs only send
rotary pulses at 10 pps.
1312
Usage
If the PPS field is 10, the sum of the Make (msec) and Break (msec)
fields must equal 100.
If the PPS field is 20, the sum of the Make (msec) and Break (msec)
fields must equal 50.
Usage
Enter y if Periodical Pulse Metering (PPM) pulses should be
collected from the public network to determine call cost. If this field
is y, the field appears.
Frequency
Usage
Enter the rate (pulses per second) at which outgoing rotary pulses
are sent over this trunk group.
Administrator's Guide for Avaya Communication Manager
November 2003