Avaya Communication Manager Administrator's Manual page 1240

Screen Reference
Terminal Parameters
Primary levels
The following fields only appear if Customize Parameters is set to y. In each case, if the field is blank, the
system uses the default setting from the Default Parameter Set. Also, these fields all require the same
input; valid entries are from -44.0 db through +14.0 db in 0.5 increments (for example, -44.0, -43.5, -43.0
and son on).
Volume for DCP Types
This field allows the DCP phone volume to be adjusted while the call is in progress.
Valid entries
default speaker, handset
unchangeable
default settings used to begin each
call
retain handset and speaker
between calls
retain speaker, handset
unchangeable
Volume for IP Types
This field allows the IP phone volume to be adjusted while the call is in progress.
NOTE:
If you use this field, Avaya recommends that you not change any values in the PRIMARY
LEVELS or BUILT-IN SPEAKER LEVELS areas.
Valid entries
default speaker, handset
unchangeable
default settings used to begin each
call
retain handset and speaker
between calls
retain speaker, handset
unchangeable
1240
Usage
The speaker resets to the default settings while the
adjusted handset setting is retained.
No adjusted handset and speaker settings are
retained.
The adjusted handset and speaker settings are
retained.
Only the adjusted speaker setting is retained.
Usage
The speaker resets to the default settings while the
adjusted handset setting is retained.
No adjusted handset and speaker settings are
retained.
The adjusted handset and speaker settings are
retained.
Only the adjusted speaker setting is retained.
Administrator's Guide for Avaya Communication Manager
November 2003