Avaya Communication Manager Administrator's Manual page 1278

Screen Reference
Trunk Group
Outgoing Display
This field allows display phones to show the name and number of the trunk group used for an outgoing
call before the call is connected. This information may be useful to you when you're trying to diagnose
trunking problems.
Valid entries
y
n
Prefix-1
Use this field for outgoing and two-way trunk groups handling long distance service. This field appears
for CO, FX, and DIOD trunk groups.
Valid entries
y/n
Protocol Type
This field specifies the type of line signaling protocol used for DID and DIOD trunk groups. This field
appears when the
TN2199 or TN464D vintage 3 or later circuit pack.
Valid entries
inloc (Incoming local)
intol (Incoming toll)
Queue Length
Outgoing calls can wait in a queue, in the order in which they were made, when all trunks in a trunk
group are busy. If you enter 0, callers receive a busy signal when no trunks are available. If you enter a
higher number, a caller hears confirmation tone when no trunk is available for the outgoing call. The
caller can then hang up and wait: when a trunk becomes available, Communication Manager will call the
extension that placed the original call. The caller will hear 3 short, quick rings. The caller doesn't need to
do anything but pick up the handset and wait: Communication Manager remembers the number the caller
dialed and automatically completes the call.
This field appears when the
Valid entries
0 to 100
0
1278
Usage
Displays the trunk group name and number.
Displays the digits the caller dials.
Usage
Enter y to add the prefix "1" to the beginning of the digit string for
outgoing calls. Do not enter y for trunk groups in AAR or ARS
route patterns.
Country field is 15 and is used only by trunk group members administered on a
Usage
Enter the protocol the central office is using for this
trunk group. Only the inloc protocol provides ANI.
field is outgoing or two-way.
Direction
Usage
Enter the number of outgoing calls that you want to be held waiting
when all trunks are busy.
Enter 0 for DCS trunks.
Administrator's Guide for Avaya Communication Manager
November 2003