Avaya Communication Manager Administrator's Manual page 1306

Screen Reference
Trunk Group
Normal Outgoing Seize Send (msec)
This field appears only if the Trunk Type field is dis and the trunk group Direction field is two-way or
outgoing. Only TN2140 ports receive this timer.
Valid entries
10 to 990 in
increments of
10
Outgoing Dial Guard (msec)
Valid entries
100 to 25500 in
increments of
100
Outgoing Disconnect (msec)
Valid entries
50 to 2550 in
increments of
10
Outgoing Disconnect Send (msec)
This field is administrable only if the
two-way or outgoing. Only TN2140 ports receive this timer.
Valid entries
100 to 9900 in
increments of
100
1306
Usage
Enter the duration of the signal your server running Communication
Manager sends for an outgoing seizure.
Usage
Enter the minimum interval between seizure acknowledgment of a
trunk and the outpulsing of digits. This field cannot be blank. For
trunks that do not provide seizure acknowledgment, the timer
specifies the minimum time between seizure and the outpulsing of
digits. Any digit the caller dials after they lift the receiver, but
before the timer expires, is not outpulsed until the timer expires.
Usage
Enter the minimum valid duration of a disconnect signal for an
outgoing call. Communication Manager will not recognize shorter
disconnect signals. This field cannot be blank. This timer begins
timing when a disconnect signal is detected on an outgoing call and
resets when the signal is no longer detected. If the timer expires, the
trunk drops. For Brazil pulsed E&M signaling, use 600.
Trunk Type
Usage
Enter the duration of the forward release signal your server running
Communication Manager sends at the end of outgoing calls.
Administrator's Guide for Avaya Communication Manager
field is dis and the trunk group Direction field is
November 2003