Avaya Communication Manager Administrator's Manual page 1043

ARS Prefix 1 Required for 10-Digit NANP
Calls?
Valid
entries
y/n
Attd FAC
The field is controlled by the
Attd FAC
the
system-parameters customer-options
of FAC/DAC on the Dial Plan Analysis Table screen for first digit 0–9.
A user cannot adminster an Attd FAC unless an Attendant Access Code has first been administered on
either the Dial Plan Analysis Table screen or the Feature Access Code (FAC) screen
NOTE:
Within a dial plan, FAC/DAC codes and extensions cannot both start with the same first
digits.Either the FAC/DAC entries or the block of extensions must be changed to have a
different first digit..
Valid entries
0 to 9
Loc Number
Displays the location number (1 to 250). Corresponding entries in each row define the numbering plan
and daylight savings rule for each location number.
Name
Identifies the server running Communication Manager associated with each location number.
Valid entries
up to 15 alphanumeric
characters
NPA
Valid entries
0 to 9
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Enter y when a 1 must be dialed before all 10-digit NANP calls.
Multiple Locations
command). Administration of this field must be a
Usage
.Values up to two digits are permitted. Characters * or # are not
permitted. Many locations are expected to share the same access
code.
Usage
A name you use for the location. Names are easier to
remember than location numbers.
Usage
Enter the 3-digit numbering plan area code for each location.
Screen Reference
field on the Optional Features screen (use
Locations
Call Type
1043