Avaya Communication Manager Administrator's Manual page 1172

Screen Reference
Station
Emergency Location Ext
The
Emergency Location Ext
address or nearby location when an emergency call is made. For more information about the use of this
field, see the Usage description for the
Valid entries
1-8 digits
Endpt ID
Appears only if
field must have a unique value for each endpoint on the same port.
This field provides for multipoint configuration conformance to the Bellcore Terminal Initialization
procedures. In these procedures, a multipoint configuration requires the last 2 digits of the Service Profile
Identifier (SPID) be between 00 and 63 and be binary unique for each endpoint.
For WorldClass BRI (WCBRI) data modules only, this field, combined with the SPID, gives the effective
SPID administered into the terminal. Bellcore ISDN-1 requires the SPID programmed into the endpoint
contain at least 9 digits. For example, if the SPID is 1234, and
on the terminal is 000123401. The three leading zeros are necessary to create a 9-digit SPID.
Endpt Init
Endpoint initialization is a procedure, required for multipoint operation, by which User Service Order
Profile (USOP) is associated with an endpoint on the ISDN-BRI. This association is made via the SPID,
administered into the system, and entered into the ISDN-BRI terminal. For an ISDN-BRI terminal to be
operational in a multipoint configuration, both the administered SPID and the SPID programmed into the
ISDN-BRI terminal must be the same. Therefore, the SPID of new or reused terminals must be
programmed to match the administered SPID value. Appears only if
terminal's endpoint initialization capability.
Valid entries
y
n
Expansion Module
Valid entries
y/n
1172
field defaults to the phone's extension. This extension identifies the street
Remote Softphone Emergency Calls
Usage
Enter the Emergency Location Extension for this station.
Endpt Init is y. Enter a unique 2-digit number (00–62) for this endpoint. Each Endpt ID
Usage
Enter y if the terminal supports Bellcore ISDN-1 terminal
initialization procedures.
Enter n for all other country protocols.
Usage
Enter y if this phone has an expansion module. This will enable you
to administer the buttons for the expansion module.
Administrator's Guide for Avaya Communication Manager
field later in this section.
is 01, then the SPID administered
Endpt ID
is y and indicates the
MIM Support
November 2003