Avaya Communication Manager Administrator's Manual page 1089

Field descriptions for page 3
The fields shown on Page 3 of the Multifrequency-Signaling-Related System Parameters screen define
the meaning of MFC tones for calls originated at the CO. See
on page 1094 for more information. This screen appears only if the
group-ii-mfc or non-group-ii-mfc.
When the screen initially appears, either of two sets of default values is possible. One set is for the group
II call type; the other set is for non-group II call type. In each set, the default value for each field is set to
the most common value.
<Link>Screen 312 shows the defaults when the
appears if
Incoming Call Type
group II and group B columns do not appear.
Figure 312: Multifrequency-Signaling-Related Parameters screen
change multifrequency-signaling
INCOMING FORWARD SIGNAL TYPES
(Tones from CO)
Group-I
11: ignored
12: ignored
13: ignored
14: ignored
15: ignored
Administrator's Guide for Avaya Communication Manager
November 2003
Incoming Call Type
is non-group-ii-mfc. When
MULTIFREQUENCY-SIGNALING-RELATED PARAMETERS
Group-II
1: normal
2: normal
3. normal
4: normal
5: normal
6: normal
7: normal
8: normal
9: normal
10: normal
11: normal
12: normal
13: normal
14: normal
15: normal
Multifrequency-Signaling-Related Parameters
Definitions of Group I, II, A, and B signals
Incoming Call Type
field is group-ii-mfc. A variation
Incoming Call Type
INCOMING BACKWARD SIGNAL TYPES
(Tones to CO)
Group-A
1: next-digit
3: end-of-dial
__:
__: ________________
__: ________________ __: __________
__: ________________ __: __________
__: ________________ __: __________
__: ________________ __: __________
__: ________________ __: __________
__: ________________ __: __________
__: ________________ __: __________
__: ________________ __: __________
__: ________________ __: __________
__: ________________ __: __________
__: ________________ __: __________
Screen Reference
field is
is non-group-ii-mfc,
Page 3 of X
Group-B
1: free
2: busy
4: congestion
7: intercept
1089