Avaya Communication Manager Administrator's Manual page 917

Routing Digits (e.g. AAR/ARS Access Code)
Appears only if the Message Center field is qsig-mwi or fp-mwi. Shows the AAR (most likely for a
Message Center type of qsig-mwi) or ARS (most likely for a Message Center type of fp-mwi) access
code which when prepended to the AUDIX Complete Number field defines a route to the Message
Center switch hunt group containing the line ports to the AUDIX.
Valid entries
0-9, *, or #
Second Announcement Delay (sec)
Appears only when the ACD and Queue fields both are y and the Vector field is n. Enter the time in
seconds before the call in the queue receives a second recorded announcement or that the second
announcement is repeated.
Valid entries
1 through 99
blank
Second Announcement Extension
Appears only when the
NOTE:
If entering a Multi-Location Dial Plan shortened extension, see the Caution note on page
632.
Valid entries
Enter the extension number assigned to
a recorded announcement.
blank
Second Announcement Recurring
Appears only when the
Valid entries
y
blank
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Enter 1-4 digits.
Usage
Avaya recommends that, if this split/skill or hunt group is a
coverage point for another split/skill, this delay should not be more
than 15 seconds.
Leave blank if there is no second announcement.
ACD and Queue fields both are y and the
Usage
Leaving the field blank indicates there is no
second announcement.
and fields both are y and the
ACD Queue
Usage
The second announcement can be repeated.
Leave blank if there is no second announcement.
Screen Reference
Vector field is n.
field is n.
Vector
Hunt Group
917