Avaya Communication Manager Administrator's Manual page 1088

Screen Reference
Multifrequency-Signaling-Related Parameters
Restart ANI from Caller Category
Display-only field.
Valid entries
y/n
Truncate Station Number in ANI
This field applies to Russian shuttle trunks, and MFC and MFE trunks.
Valid entries
beginning
ending
no
INCOMING / OUTGOING
ANI Available
Valid
entries
1 to 15 or
blank
ANI Not Available
You must enter a value if the ANI for PBX field is blank
Valid
entries
1 to 15 or
blank
1088
Usage
If y, Avaya Communication Manager sends the caller-category signal
later again when the signals for Caller-Category and ANI requests are
the same and this signal is received after the Next-Digit forward
signals have been received.
Usage
This field defines the side of the extension number from which to
truncate when station ANI is sent to the CO and the combined
length of the ANI prefix and extension number is greater than
Number of Outgoing ANI Digits. The ANI prefix (either MFC or
COR) is not truncated. There is no effect if ANI for PBX is sent.
Usage
Enter the number of incoming and outgoing ANI-Available signals.
Usage
Enter the number of the incoming and outgoing ANI-Not-Available
signals.
Communication Manager outpulses the End-of-Dial backward signal
when the ANI-Not-Available forward signal is received on incoming
calls. Communication Manager outpulses the ANI-Not-Available
forward signal to the CO on outgoing calls where ANI is not possible.
Administrator's Guide for Avaya Communication Manager
November 2003