Avaya Communication Manager Administrator's Manual page 1308

Screen Reference
Trunk Group
Outgoing Rotary Dial Interdigit (msec)
This field only appears when:
1
the trunk group
the
Outgoing Dial Type
2
the
Group Type
Type field is rotary
3
the
Group Type
field does not appear but is implied to be rotary).
Valid entries
150 to 2550 in
increments of
10
Outgoing Seizure (msec)
Appears when the Country field is 15, the Direction field is outgoing or two-way, and the
field is 2-wire-ac, 2-wire-dc, or 3-wire. This timer is sent only to the TN2199 circuit pack.
Valid entries
20 to 2550 in
increments of
10
Outgoing Seizure Response (sec)
This timer is sent to the TN438B, TN439, TN447, TN458, TN464B (or later), TN465B (or later), TN767,
TN2140, TN2147, TN2184, TN2199, and TN2242 circuit packs.
Valid entries
1 to 255 in
increments of 1
1308
field is access, aplt, co, diod, dmi-bos, fx, rlt, tandem, or wats and
Group Type
field is rotary
field is tie, the
Trunk Type
field is tie, and the
Trunk Type
Usage
Enter the minimum time between outpulsed digits on outgoing
rotary trunks.
Usage
Enter the duration of the outgoing seizure signal.
Usage
Enter the maximum interval that Communication Manager should
wait after sending a seizure signal to receive seizure
acknowledgment from the far-end. If the acknowledgment is not
received in this time, a seizure failure response is uplinked. For
Brazil pulsed E&M signaling, use 255.
Administrator's Guide for Avaya Communication Manager
field is blank, cont, or dis, and the
field is tge, tgi, or tru (the
Outgoing Dial
Outgoing Dial Type
Trunk Type
November 2003