Avaya Communication Manager Administrator's Manual page 1084

Screen Reference
Multifrequency-Signaling-Related Parameters
Request Incoming ANI (non-AAR/ARS)
Appears when the
group-ii-mfc or mfe. This field only applies if the incoming call via the R2-MFC trunk is terminating to
a local station on this PBX.
Valid
entries
y/n
Transmitted Signal Gain (dB)
Valid
entries
-15 to 3
Use COR for All Group II Responses
Appears if the Outgoing Call Type field is group-ii-mfc.
Valid entries
y/n
Use COR for Calling Party Category
Appears when the Outgoing Call Type field is group-ii-mfc and the Use COR for All Group II
Responses field is n. Indicates the category to send with ANI if requested on an outgoing R2-MFC call.
Valid entries
y
n
1084
field is group-ii-mfc or mfe and the
Incoming Call Type
Usage
If , ANI should be requested on incoming R2-MFC calls.
y
Usage
Enter the number for the loss/gain when the trunk port listens to the
MFC port. The MFC port generates at -5 for MFC and -8 for MFE,
and this field adds gain or loss to the starting value of -5. This value
also applies to Russian Shuttle trunks and Russian multi-frequency
ANI.
Usage
Enter y to allow the COR administered category to be used for both
the calling party and called party categories.
Usage
Use the calling facility's COR to determine category.
Use the calling party's user-type COR to determine category.
Administrator's Guide for Avaya Communication Manager
field is
Outgoing Call Type
November 2003