Avaya Communication Manager Administrator's Manual page 787

Line Compensation
The appropriate entry in this field varies with the type of cable used, so work with your network service
provider to determine the correct setting in your situation. The following table shows the appropriate
entries for different lengths of 22-gauge ABAM cable terminated on a DSX-1 cross-connect.
Valid
entries
1
2
3
4
5
The following table shows the appropriate entries for different lengths of 22-gauge ABAM cable directly
connecting to DS1 interfaces.
Valid
entries
1
2
3
4
5
Location
This display-only field shows the port address specified in the add command when the circuit pack was
first administered.
MMI Cabling Board
This field appears only if the
Valid entries
slot address
(cabinet,
carrier, slot)
MMI Interface
This display-only field appears if the
screen and there is a value in the
Administrator's Guide for Avaya Communication Manager
November 2003
Usage
Length: 000–133 (ft), 000-40.5 (m)
Length: 133–266 (ft), 40.5–81.0 (m)
Length: 266–399 (ft), 81.0–122 (m)
Length: 399–533 (ft), 122–163 (m)
Length: 533–655 (ft), 163–200 (m)
Usage
Length: 0000–0266(ft), 000–081(m)
Length: 0266–0532(ft), 081–162(m)
Length: 0532–0798(ft), 162–243(m)
Length: 0798–1066(ft), 243–325(m)
Length: 1066–1310(ft), 325–400(m)
field is y on the System-Parameters Customer-Options screen.
MMCH
Usage
Enter the slot location (cabinet, carrier, slot) of the multimedia
interface circuit pack that is connected to the Expansion Services
Module (ESM).
MMCH field is y on the System-Parameters Customer-Options
MMI Cabling Board field.
Screen Reference
DS1 Circuit Pack
787