Avaya Communication Manager Administrator's Manual page 1512

Feature Reference
Dial plan
Call Park
This feature does not support common shared extensions on the console parameter to park calls. Since
common shared extensions are not assigned to physical stations, the range of common shared extensions
should be able to be shared in all locations.
Crisis Alert
The
Originating Extension
extension-station
Leave Word Calling (LWC)
The field
Stations with System-wide Retrieval Permission for the Leave Word Calling Parameters
on page 2 of the System Features Parameters screen require either the attd administration on the Dial
Plan Analysis Table screen, or administration of the
Code (FAC) screen. This field requires that an attendant group exists.
LSP
If the change extension-station
to the Local Spare Processor (LSP), the two system translations might not be in sync.
You can save the translations to the LSP with either of these two commands:
•
the
filesync operation to all registered LSPs.
•
the
specific LSP). This command locally saves the translations and performs a filesync
operation to the specified LSP.
Night Service
Location-based Night Service is not supported. A customer may want to restrict attendant-seeking calls to
attendants who are local to the calling party. The reason is the local attendant would most likely speak the
same language as the caller. Those customers would want an attendant to be able to put one location only
into Night Service, without putting the entire switch into Night Service.
One way to accomplish this is to use hunt groups as attendant queues. Each hunt group can be put into
Night Service separately, and have its own Night Service destination. In addition, the Night Service
destination can be administered by tenant, by trunk group, and by trunk group number.
Security Violations Notification
The referral destination fields (
Violation Notification Enabled
Station Security Code Violation Enabled
either the attd administration on the Dial Plan Analysis Table screen, or administration of the
Access Code on the Feature Access Code (FAC) screen. This field requires that an attendant group
exists.
Station Hunting
Changing a station extension with the
chain.
1512
on the Crisis Alert System Parameters screen is not updated by the
command. It must be manually updated if the originating extension field was changed.
command is run on the controller, but the translations are not also saved
command. This command locally saves the translations and performs a
save trans lsp
save trans lsp <IP address>
SVN Login Violation Notification Enabled
,
SVN Authorization Code Violation Notification Enabled
) on the Security-Related System Parameters screen require
change extension-station
Administrator's Guide for Avaya Communication Manager
Attendant Access Code
command (where
<IP address>
,
command maintains the station hunting
change
on the Feature Access
is the IP address of a
SVN Remote Access
, and
SVN
Attendant
November 2003